1968-1970 Shelby Mustang Sequential Turn signal parts

SEQUENTIAL TURN SIGNAL SYSTEM PARTS

for 1968-1970 Shelby Mustangs

1967-1968 Shelby Mustangs

Electronic Turn Signal Sequencer Kit -

"Dynamite Stick" style ELECTRONIC TURN SIGNAL SEQUENCER For 1968 Shelby Mustangs, California Specials and Eleanor clones

S8MS-13A366-LK: Fits 1968 Shelby Mustangs $ 195.45 ---> NEW!!!
These sequencers are designed to work with either LED or 1157 incandescent bulbs!
Exact replacement for (GE) Ford S8MS-13A366-A sequential "Dynamite stick"
The kit includes:

Two sequencer modules - one for each side
Original style connectors ready to plug into T-Bird tail light harness
Gold painted paper tube as original
Original Scotch-Lok connectors
Installation instructions for 1968 Shelby and custom cars>
Upgrade your Dynacorn 3643MF sequencers to work with LEDs!

Note: Requires two flashers (not included)

D0WY-13350-AR5 Electronic Flasher: Fits 1968-70 Shelby Mustangs $ 41.95
Designed to work with 1157 bulbs. Order two: one for turn signals and one for emergency flashers.
Use this flasher with WCCC1157R "Plasma" LED rear bulbs in 1968 Shelby Mustangs with OEM GE "Dynamite Sticks".

D0WY-13350-L Electronic Flasher: Fits 1968-70 Shelby Mustangs $ 41.95
Designed to work with LED bulbs. Order two: one for turn signals and one for emergency flashers.

Tail light harness repair kits, for cut or custom harnesses -

C5SZ-13407-AR: 1968 Shelby Tail light bezel harness w/sockets - two required. $ 86.25 each
Use only with with original 1964-66 T-Bird metal bezels.

C5SZ-14405-P1: Tail light harness repair plug (tail light side) $ 10.95 each
Two required to build custom tail light harness if C5SZ-13407-AR harnesses are not used.
The S8MS-13A366-LK sequencers plug into these pigtails.

C5SZ-14405-P2: Tail light harness repair plug $ 10.95 each
Two required for "Dynamite Sticks" without connectors.
These connectors are the sequencer plugs used in the S8MS-13A366-LK kit.

1969-1970 Shelby Mustangs

Electronic sequential system - replacement sequencer board ready to pop into your black box, includes connectors.

C9WY-13A366-AR: Fits 1969-1973 Shelby Mustangs with 1157 bulbs replaced by C9WY-13A366-AL

C9WY-13A366-AL: Fits 1969-1973 Shelby Mustangs with 1157 or LED bulbs $ 186.25

Note: CU1157R or WCCC1157R LED bulbs are recommended.
Other LED bulbs may cause problems when the running lights are on!
All LED bulbs must have dual diode internal isolation.

Electronic sequential system - NOS Ford Service Part (limited quantity)

D1WY-13A366-A: Fits 1969-1973 Shelby Mustangs after 1/1/1970 $ 250.00

Electronic flasher with extended duration to allow time for all three bulbs to flash.

D0WY-13350-AR5: Fits 1969-1970 Shelby Mustang with 1157 bulbs $ 41.95

D0WY-13350-L: Fits 1969-1970 Shelby Mustang with LED bulbs $ 41.95

Tail light harness repair kits, for cut or custom harnesses -

C9WY-13H366-AR: 1969-1970 Shelby MustangCougar (red/black plugs) $ 20.35

WARNING! These products may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. See: www.P65Warnings.ca.gov

Order your turn signal parts from:

Include $15.00 shipping

Or order On-Line from: Barganspot

Makers of Cougar and Thunderbird Electronic Sequencers since 1981

Back to Cougars Unlimited Home Page

smparts.htm 07/09/22